IBM INTELLISTATION E PRO 6204, Руководство пользователя

Страница: 53 / 162

© Copyright IBM Corp. 2000, 2001
37
Chapter 5. Installing options
This chapter provides instructions to help you install or replace options on your
computer. For a list of supported options for your computer, go to
http://www.ibm.com/pc/support on the World Wide Web.
Before you begin
Before you begin to install options in your computer, read the following information:
• Read the handling guidelines in “Handling static-sensitive devices”, and read the
safety statements in “Safety information” on page vii. These guidelines will help
you work safely with your computer and options.
• Make sure that you have an adequate number of properly grounded electrical
outlets for your computer, monitor, and other options that you intend to install.
• Back up all important data before you make changes to disk drives.
• Have a small, flat-blade screwdriver available.
• Before accessing the inside of the tower model computer, rotate the two front
stabilizing feet a quarter turn in towards the computer, so they do not break.
Before placing the computer in an upright position, rotate the two front feet a
quarter turn outward from the computer. See “Moving the stabilizing feet” on
page 12.
• For a list of supported options for your computer, refer to
http://www.ibm.com/pc/support on the World Wide Web.
System reliability considerations
To help ensure proper system cooling and system reliability, make sure that:
• Each of the drive bays has a drive or a filler panel and electromagnetic
compatibility (EMC) shield installed.
• There is adequate space around the computer to allow the computer cooling
system to work properly. Leave approximately 51 mm (2 in.) of open space
around the front and rear of the computer. Do not place objects in front of the
fans.
• You have followed the instructions for cabling provided with optional adapters.
• You have replaced a failed fan as soon as possible.
Handling static-sensitive devices
Attention: Static electricity can damage electronic devices, including your computer.
To avoid damage, keep static-sensitive devices in their static protective bag until you
are ready to install them.
To reduce the possibility of damage from electrostatic discharge, observe the
following precautions.
• Limit your movement. Movement can cause static electricity to build up around
you.
• Handle the device carefully, holding it by its edges or its frame.
• Do not touch solder joints, pins, or exposed circuitry.
• Do not leave the device where others can handle and, possibly, damage the
device.