IBM HS40 - BladeCenter - 8839, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 111 / 172

Temperature-related system shutdown
Note: See Chapter 7, “Parts listing, Type 8839,” on page 105 to determine which components should be replaced by
a field service technician.
Message Action
System shutoff due to CPU x over
temperature
1. Ensure that the system is being properly cooled ; see “System
reliability considerations” on page 33.
2. Replace microprocessor x .
System shutoff due to Blade Storage
Expansion option temperature
1. Ensure that the system is being properly cooled ; see “System
reliability considerations” on page 33.
2. Replace Blade Storage Expansion option.
CPU x shut off due to over temperature
1. Ensure that the system is being properly cooled ; see “System
reliability considerations” on page 33.
2. Replace microprocessor x .
Critical Blower Failure, blade server
powering down
See IBM BladeCenter Type 8677 Hardware Maintenance Manual
and Troubleshooting Guide .
Power Modules are over temperature,
blade server powering down
See IBM BladeCenter Type 8677 Hardware Maintenance Manual
and Troubleshooting Guide .
Hard disk drive checkout
Note: See Chapter 7, “Parts listing, Type 8839,” on page 105 to determine which components should be replaced by
a field service technician.
Message Action
Hard drive x removal detected
(level-critical; hard drive x has been
removed)
Information only, take action as appropriate.
Undetermined problems
Note: When troubleshooting a problem in the blade server, you must determine
whether the problem is a blade server problem or a problem with the
BladeCenter unit.
v
If the BladeCenter unit contains more than one blade server and only one
of the blade servers exhibits the problem, it is likely that it is a blade
server problem.
v
If all of the blade servers exhibit the same symptom, it is probably a
BladeCenter unit problem; for more information, see the IBM BladeCenter
Type 8677 Hardware Maintenance Manual and Troubleshooting Guide .
Use the information in this section if the diagnostic tests did not diagnose the
failure, the devices list is incorrect, or the system is inoperative.
Chapter 6. Symptom-to-FRU index
101