IBM E Server x 100 Series, Руководство по установке

Страница: 22 / 86

Removing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
To remove the bezel, complete the following steps:
1. Remove the side cover (see “Removing the side cover” on page 9).
2. From inside the server, locate the two bezel release tabs at the bottom of the
bezel.
Bezel
release
tabs
3. Press up slightly on both bezel release tabs while pulling the bottom of the
bezel away from the server to disengage the tabs and remove the bezel.
4. Store the bezel in a safe place.
For instructions for replacing the bezel, see “Installing the bezel” on page 25.
10
xSeries 100 Type 8486: Installation Guide