IBM E Server x 100 Series, Руководство по установке

Страница: 21 / 86

Removing the side cover
To remove the server side cover, complete the following steps:
1. Read the safety information that begins on page v and the “Installation
guidelines” on page 7.
2. Turn off the server and all attached devices (see “Turning off the server” on
page 32); then, disconnect all power cords and external cables.
3. Lay the server on its side.
4. Remove the two thumbscrews from the rear of the server that secures the cover
to the chassis. Slide the cover slightly toward the rear of the chassis and lift it
off the server and set it aside.
Thumbscrews
To replace the side cover, see “Installing the side cover” on page 25.
Attention: For proper cooling and airflow, replace the cover before turning on the
server. Operating the server for extended periods of time (more than 30 minutes)
with the cover removed might damage server components.
Chapter 2. Installing options
9