IBM E Server x 100 Series, Руководство по установке

Страница: 57 / 86

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See the parts listing in the Problem Determination and Service Guide to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
I9990305 An operating system was not found.
1. Make sure that a bootable operating system is
installed.
2. Run the hard disk drive diagnostic tests (see the
Problem Determination and Service Guide for
information about running the diagnostic tests).
3. Reseat the following components:
a. Hard disk drive cable
b. Hard disk drive.
4. Replace the following components one at a time,
in the order shown, restarting the server each
time.
a. Hard disk drive cable
b. Hard disk drive
c. (Trained service technician only) System
board
19990650 The ac power has been restored.
1. Reseat the power cord.
2. Check for the interruption of external power
source.
3. Replace the power cord.
Chapter 5. Solving problems
45