IBM BladeCenter JS22, Руководство по диагностике и обслуживанию

Страница: 191 / 314

Table 24. A00-FF0 through A24-xxx SRNs (continued)
SRN Description FRU/action
A1D-05x A non-critical error has been detected, a
service processor error accessing special
registers.
1. Check the BladeCenter management-module
event log; if an error was recorded by the
system, see “POST progress codes
(checkpoints)” on page 88.
2. If no entry is found, replace the system-board
and chassis assembly.
A1D-06x A non-critical error has been detected, a
service processor reports unknown
communication error.
1. Check the BladeCenter management-module
event log; if an error was recorded by the
system, see “POST progress codes
(checkpoints)” on page 88.
2.
If no entry is found, replace the system-board
and chassis assembly.
A1D-07x A non-critical error has been detected,:
Internal service processor firmware
error or incorrect version.
1. Check the BladeCenter management-module
event log; if an error was recorded by the
system, see “POST progress codes
(checkpoints)” on page 88.
2. If no entry is found, replace the system-board
and chassis assembly.
A1D-08x A non-critical error has been detected,
another internal service processor
hardware error.
1. Check the BladeCenter management-module
event log; if an error was recorded by the
system, see “POST progress codes
(checkpoints)” on page 88.
2. If no entry is found, replace the system-board
and chassis assembly.
A1D-09x A non-critical error has been detected, a
service processor error accessing vital
product data EEPROM.
1. Check the BladeCenter management-module
event log; if an error was recorded by the
system, see “POST progress codes
(checkpoints)” on page 88.
2. If no entry is found, replace the system-board
and chassis assembly.
A1D-12x A non-critical error has been detected, a
service processor error accessing fan
sensor.
1. Check the BladeCenter management-module
event log; if an error was recorded by the
system, see “POST progress codes
(checkpoints)” on page 88.
2.
If no entry is found, replace the system-board
and chassis assembly.
A1D-13x A non-critical error has been detected, a
service processor error accessing a
thermal sensor.
1. Check the BladeCenter management-module
event log; if an error was recorded by the
system, see “POST progress codes
(checkpoints)” on page 88.
2. If no entry is found, replace the system-board
and chassis assembly.
A1D-18x A non-critical error has been detected, a
service processor detected NVRAM
error.
1.
Check the BladeCenter management-module
event log; if an error was recorded by the
system, see “POST progress codes
(checkpoints)” on page 88.
2. If no entry is found, replace the system-board
and chassis assembly.
Chapter 2. Diagnostics
177