IBM BladeCenter JS22, Руководство по диагностике и обслуживанию, Страница: 51 / 314

Table 11. B200xxxx Logical partition SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
B200 xxxx Error
Code
Description Action
8109 During the startup of a partition, a
failure occurred. The startup will not
continue.
1. Make sure that there is enough memory to start up
the partition.
2. Check for server firmware updates; then, install the
updates if available.
8111 A problem occurred during the
startup of a partition. Check for server firmware updates; then, install the
updates if available.
8112 During the startup of a partition, a
failure occurred; the startup will not
continue. Check for server firmware updates; then, install the
updates if available.
8113 During the startup of a partition, an
error occurred while mapping
memory for the partition startup. Check for server firmware updates; then, install the
updates if available.
8114 During the startup of a partition,
there was a failure verifying the
VPD for the partition resources
during startup. Check for server firmware updates; then, install the
updates if available.
8115 During the startup of a partition,
there was a low level
partition-to-partition communication
failure. Check for server firmware updates; then, install the
updates if available.
8117 During the startup of a partition, the
partition did not start up due to a
system firmware error. Check for server firmware updates; then, install the
updates if available.
8121 During the startup of a partition, the
partition did not start up due to a
system firmware error. Go to “Isolating firmware problems” on page 222.
8123 During the startup of a partition, the
partition did not start up due to a
system firmware error. Go to “Isolating firmware problems” on page 222.
8125 During the startup of a partition, the
partition did not start up due to a
system firmware error. Go to “Isolating firmware problems” on page 222.
8127 During the startup of a partition, the
partition did not start up due to a
system firmware error. Go to “Isolating firmware problems” on page 222.
8129 During the startup of a partition, the
partition did not start up due to a
system firmware error. Go to “Isolating firmware problems” on page 222.
813A There was a problem establishing a
console. Go to “Isolating firmware problems” on page 222.
8140 Informational system log entry only. No corrective action is required.
8141 Informational system log entry only. No corrective action is required.
8142 Informational system log entry only. No corrective action is required.
8143 Informational system log entry only. No corrective action is required.
Chapter 2. Diagnostics
37