IBM BladeCenter JS22, Руководство по диагностике и обслуживанию, Страница: 32 / 314

Table 4. 1xxxyyyy SRCs (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
1xxxyyyy
Error Codes
Description Action
2610 Power good (pGood) fault
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis assembly, as described in
“Replacing the Tier 2 system-board and chassis assembly” on
page 270.
2620 12V dc pGood input fault
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis assembly, as described in
“Replacing the Tier 2 system-board and chassis assembly” on
page 270.
2622 SMP expansion_comp_pgood
fault
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis assembly, as described in
“Replacing the Tier 2 system-board and chassis assembly” on
page 270.
2623 mezzanine_comp_pgood fault
1. Go to “Checkout procedure” on page 186.
2.
Replace the system-board and chassis assembly, as described in
“Replacing the Tier 2 system-board and chassis assembly” on
page 270.
2624 mezzanine_12V_pgood fault
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis assembly, as described in
“Replacing the Tier 2 system-board and chassis assembly” on
page 270.
2625 PCIE_A0_PGOOD fault Perform the DTRCARD Symbolic CRU isolation procedure by
completing the following steps:
1. Reseat the PCIe expansion card.
2. If the problem persists, replace the expansion card.
3. If the problem persists, go to “Checkout procedure” on page
186.
4.
If the problem persists, replace the system board and chassis
assembly, as described in “Replacing the Tier 2 system-board
and chassis assembly” on page 270.
The DTRCARD Symbolic CRU isolation procedure is in “Service
processor problems” on page 205.
2626 PCIE_A1_PGOOD fault Perform the DTRCARD Symbolic CRU isolation procedure by
completing the following steps:
1. Reseat the PCIe expansion card.
2. If the problem persists, replace the expansion card.
3.
If the problem persists, go to “Checkout procedure” on page
186.
4. If the problem persists, replace the system board and chassis
assembly, as described in “Replacing the Tier 2 system-board
and chassis assembly” on page 270.
The DTRCARD Symbolic CRU isolation procedure is in “Service
processor problems” on page 205.
18
JS22 Type 7998: Problem Determination and Service Guide