IBM Aptiva 2162 Series, Техническое обслуживание оборудования, Страница: 81 / 222

Table 2-1 (Page 18 of 27). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Beeps
Note: The system has an error if you hear one or more beeps in a row before
POST is completed.
Important
In the following Beep Code Index, the numbers indicate the sequence and
number of beeps. For example, a “2-3-2” beep code symptom (a burst of two
beeps, three beeps, then a burst of two beeps) indicates a memory DIMM
problem. (Continue with the Symptom-to-FRU index below for other
beep/no-beep symptoms.)
No beep and:
Ÿ
Blank or unreadable monitor
Ÿ
Blinking cursor
“Power Supply” on page 2-37.
Repeating short beeps. “Keyboard” on page 2-42
Keyboard (sticking key)
Keyboard connection/cable
System Board
4 Video adapter
System Board
1-1-2
CPU test Processor
1-1-3
CMOS read/write error. Run the Setup Utility.
System Board
1-1-4
ROM BIOS check error. System Board
1-2-1
Programmable interval timer System Board
1-2-X
DMA error System Board
1-2-4
RAM error “Memory” on page 2-40.
System Board
1-3-4
DMA register test System board
Check Procedures
2-27