IBM Aptiva 2162 Series, Техническое обслуживание оборудования, Страница: 33 / 222

Ÿ
Two, 168-pin Gold, EDO, Unbuffered, Synchronous Dynamic Random
Access Memory (SDRAM) DIMM module sockets.
Depending on model, 16 MB or 32 MB of system memory is supplied.
Maximum system board memory is 64 MB.
Ÿ
Ports: serial, USB (Universal Serial Bus), parallel, keyboard, mouse,
and video.
Ÿ
Connectors for:
– PCI/ISA riser card (2x106-pin)
– VESA Video Feature (2x20 un-shrouded)
– Input power (12-pin)
– AT diskette drives (34-pin)
– Two 40-pin IDE drive controllers: a primary local bus IDE that
supports two hard disk drives and a secondary IDE that supports a
CD-ROM drive and one hard disk drive, or two hard disk drives.
Note: The IDE connectors can each support two drives of Modes
0-4. Mode 0, 1, 2, 3, 4, etc. are the progressive industry
levels for IDE.
Ÿ
Power-on switch 2-wire connector and a power supply auxiliary control
3-wire connector for Rapid Resume features.
Ÿ
Wake Up on Ring connector for Rapid Resume automatic wake-up
features.
Ÿ
Lithium battery.
Processors
One of the following processors can be installed:
Ÿ
Pentium P54C-133 MHz 1
Ÿ
Pentium P55C-166 MHz
Ÿ
Pentium P55C-200 MHz
Modem Adapter Card
The following Data/FAX/Voice/Speech modem support is available:
Ÿ
33600 or 55600 bps data
Ÿ
14400 bps send and receive FAX
1 MHZ measures internal clock speed of the microprocessor only; not application
performance. Many factors also affect application performance.
General Information
1-7