IBM Aptiva 2162 Series, Техническое обслуживание оборудования, Страница: 34 / 222

Power Supplies (with Rapid Resume Features)
Ÿ
The power supply is a 145-W switchable high/low voltage power supply
with a variable fan speed and a connector for a detachable grounded
3-wire power cord. The power cable has four DASD connectors: one
mini power connector and three standard 4-pin connectors. The power
supply also has a non-switched appliance outlet connector.
Ÿ
For some countries outside the United States, the power supply might
have five standard 4-pin connectors and one mini power connector, for
a total of six DASD connectors.
Ÿ
To support the Rapid Resume feature, all power supplies have a 3-wire
auxiliary control cable that connects to the system board. There is no
on/off switch cable assembly for the power supplies.
Cables
All models contain one cable for hard disk drives and one cable for
diskette drives. A momentary power switch and cable assembly that
connects to the system board, a Wake Up on Ring modem cable, and a
voice modem cable are also included.
Diskette Drive—AT-type
All models except Japan contain a 3.5-in. 1.44 MB slimline diskette
drive.
Japan models support 3.5-in. 1.2 MB mode 3 diskette drive.
Multimedia
Ÿ
5.25-in. high-performance, 8-16X CAV (Constant Angular Velocity)
CD-ROM IDE/AT drive that can read data and play audio from standard
and mini CD-ROM and audio compact discs (audio CDs). It is
compatible with industry-standard multimedia requirements.
Note: CAV CD-ROM drives run at a constant speed. This causes
eight-speed reading at the disk hub and sixteen-speed reading
at the disk edge.
Ÿ
An audio cable
Ÿ
Sound adapter card (on some models)
Ÿ
A CD-ROM drive system interface cable.
Ÿ
One pair of speakers integrated into monitor.
Ÿ
Sub Woofer (on some models).
Ÿ
Microphone integrated into monitor.
Ÿ
Joystick (on some models).
1-8