IBM Aptiva 2162 Series, Техническое обслуживание оборудования, Страница: 152 / 222

2032—Media Console
Ÿ
Disconnect the Media Console cable from the system unit.
Ÿ
Remove the two bottom screws.
Ÿ
Pry off the left and right wing covers as shown in Figure 4-8.
Ÿ
Open the Media Console
Ÿ
Press in the tabs on the left and right sides of the bottom cover as
shown in Figure 4-9.
Ÿ
Snap the On/Off switch assembly out of the front cover and feed it back
through the hole in the front cover.
Ÿ
Pry out the bottom cover at the pivot as shown in Figure 4-9 and raise
upward to release the Media Console from the bottom cover.
Ÿ
Raise the top cover assembly from the bottom cover and remove the
spring.
Figure 4-8. Media Console Wing Cover Removal
Figure 4-9. Media Console Bottom Cover Removal
Note: When reassembling the Media Console to the bottom cover, be sure
to put the two ends of the spring in the holes in the bottom of the Media
Console frame.
4-8