IBM Aptiva 2162 Series Скачать руководство пользователя страница 125

Страница: 125 / 222

service manual or a device not supported by IBM diagnostic tests.

If all devices and adapters have been removed, and the problem remains:

1. Remove all cables from connectors on the system board except the

power supply and switch cables. See and “System Board Layout” on
page 5-2 for connector locations.

2. Remove all DIMMs from sockets.

3. Power-on the system unit and listen for any beeps.

4. If there are beeps, replace the system board and use the current

processor on the FRU system board.

5. If there are no beeps, replace the processor and use the current system

board.

6. If there are still no beeps, replace the current system board and use the

FRU processor obtained in step 5.

Check Procedures

2-71

Содержание Aptiva 2162 Series































































































































































































































Результаты поиска

Содержание Aptiva 2162 Series

Отзывы:

IBM Aptiva 2162 Series, Техническое обслуживание оборудования, Страница: 125 / 222

Результаты поиска

Содержание Aptiva 2162 Series

Отзывы: