IBM Aptiva 2162 Series, Техническое обслуживание оборудования, Страница: 158 / 222

2060—Processor Removal
Attention: Processors are sensitive to static discharge. See “Handling
ESD-Sensitive Parts” on page 4-17.
Ÿ
Adapter cards (2035) if applicable.
Ÿ
To remove the processor: remove the processor retaining clip, raise the
socket lever, remove the old processor, insert the upgrade processor,
lower the socket lever firmly, then install the processor retaining clip.
Ÿ
When installing, be certain the dot on the processor is aligned with the
dot in the socket.
Notes:
1. Determine which type of processor you are installing and make sure the
jumpers are set correctly.
2. Run the Setup Utility after installing a processor.
Processor
Socket
Processor
Notch
Heat
Sink
Retaining
Clip
2
1
Figure 4-15. Processor removal
4-14