IBM Aptiva 2162 Series, Техническое обслуживание оборудования, Страница: 78 / 222

Table 2-1 (Page 15 of 27). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Serial or parallel port device
failure (adapter port). “Factory-Installed Drive Devices” on
page 2-49
Test using a wrap plug while running
Diagnostics and Utilities. Before testing,
ensure serial port A is set to address 3F8
or 3E8, whichever is not used by the
Modem card (modem settings:
COMM1=3F8, COMM2=3E8). Set serial
port B to address 2F8 or 2E8.
Device
Cable/connections
Alternate adapter
System Board
Riser Card
Sorry You Need A Mouse.
Mouse or mouse driver was not
detected. Mouse
System Board
Sound adapter card or
factory-installed adapter card
software gives a Microsoft
Windows 95 error message after
POST configuration.
Hardware problem occurred.
“Diagnostics for Factory-Installed Riser
Card, and Sound Card” on page 2-55
Sound card or adapter card
connection/cable
Sound card or adapter card
System fails to load the
Diagnostics and Utilities software
System preloaded software
works correctly. Make sure the CD-ROM drive or diskette
drive is included in the Setup Utility startup
sequence.
“Factory-Installed Drive Devices” on
page 2-49
CD-ROM drive connection/cable
CD-ROM drive
Diskette drive connection/cable
Diskette drive
Media Console
Media Console host card
Media Console client card
Media Console cable
System Board
2-24