IBM Aptiva 2162 Series, Техническое обслуживание оборудования, Страница: 108 / 222

(continued)
008 (continued)
– If clicking sounds are heard coming from the drive, replace the
media and try again.
– Check continuity of the drive system cable, and replace if
necessary.
– Replace the drive.
009
(From step 004)
– With power on, press the drive Eject button to eject the media.
DID THE DRIVE EJECT THE MEDIA?
Yes No
010
– For the Zip drive, use a paper clip to hook the manual eject lever,
then pull gently until the Zip disk ejects. After the disk is ejected,
return the eject lever to its original position.
– For the CD-ROM drive, insert and push a pin (such as a
straightened paper clip) into the manual eject hole in front of the
CD-ROM drive to release the CD.
– Replace the drive.
011
– The drive should be operating normally.
– If any new symptom appears, go to “Index of Symptoms, Messages, Error
Codes, or Beeps” on page 2-9.
2-54