IBM 6862 - PC 300 PL, Руководство пользователя

Страница: 178 / 208

Other error messages that might occur are shown below.
Note: An x value that follows an error code represents any alphanumeric character.
Error Code Description
RPL-ROM-ERR: 100 The integrated Ethernet controller cannot be
found.
Action: Make sure that the Ethernet controller is
enabled in the BIOS. If the problem persists, have
the system serviced.
RPL-ROM-ERR: 101
The integrated Ethernet controller was unable to
initialize.
Action: Make sure that the Ethernet controller is
enabled in the BIOS. If the problem persists, have
the system serviced.
RPL-ROM-ERR: 102
The integrated Ethernet controller could not be
reset.
Action: Make sure that the Ethernet controller is
enabled in the BIOS. If the problem persists, have
the system serviced.
RPL-ROM-ERR: 103
There are multiple Ethernet controllers or
adapters in the system.
Action: Specify the correct serial number in the
NET.CFG file.
RPL-ROM-ERR: 104
The integrated Ethernet controller EEPROM is
faulty or not present.
RPL-ROM-ERR: 105
The integrated Ethernet failed the loopback test.
A power-on diagnostic test performed by the
Ethernet module did not execute correctly.
Action: Have the system serviced.
RPL-ROM-ERR: 106
The integrated Ethernet controller is configured
for Plug and Play in a non-Plug and Play system.
160
Using Your Personal Computer