IBM 6862 - PC 300 PL, Руководство пользователя

Страница: 132 / 208

POST Message Description
178X A failure occurred during testing of the hard disk drive or a primary or
secondary IDE device.
Action:
1. Run the diagnostic programs. (See “Diagnostic programs” on page 136
for information about diagnostic programs provided with your
computer.)
2. If the diagnostic programs detect a failure, replace the defective hard
disk drive or primary or secondary IDE or EIDE device.
If the problem cannot be isolated and corrected, have the computer
serviced.
1800 A PCI adapter has requested a hardware interrupt that is not available.
Action:
1. Make sure that settings for all ISA legacy adapters are correct in the
Configuration/Setup Utility program. If the hardware interrupt
settings are not correct, change and save the settings. Setting the
resources used by ISA legacy adapters to ISA Resource enables the
Plug and Play function to configure around the legacy adapters.
For background information on PCI, ISA, Plug and Play, and legacy
(non-Plug and Play) adapters, refer to Installing Options in Your Personal
Computer. For information about required interrupt resource settings
for ISA legacy adapters, refer to the documentation that comes with
these adapters. For instructions on using the Configuration/Setup
Utility program, see Chapter 5, “Using the Configuration/Setup Utility
program” on page 61.
2. Make sure that switches on all ISA legacy adapters are set correctly.
For information about switch settings, refer to the documentation that
comes with the ISA legacy adapters.
3. If all hardware interrupts are being used by ISA legacy adapters, you
might need to remove an ISA legacy adapter to make an interrupt
available to the PCI adapter you want to install. For instructions on
removing adapters, see Installing Options in Your Personal Computer.
Note: If you remove an ISA legacy adapter, set the hardware interrupt
used by the removed adapter to Available before installing
another adapter.
4. If you have other PCI or Plug and Play adapters installed, you might
need to remove one of these adapters to make an interrupt available to
the PCI adapter you want to install.
If the problem cannot be isolated and corrected, have the computer
serviced.
114
Using Your Personal Computer