IBM 6862 - PC 300 PL, Руководство пользователя

Страница: 129 / 208

POST Message Description
176 The computer was tampered with. This indicates that the cover has been
removed and the chassis-intrusion detector has not been cleared by
entering the administrator password. Note that chassis-intrusion can be
detected only if the chassis-intrusion detector feature is activated, which
occurs when enhanced security is enabled and an administrator password
is set.
Action: You must enter the administrator password to clear this POST
message. If the message recurs when the cover has not been removed,
have the computer serviced.
177 An inventory violation occurred. This error message is part of the
SystemCare and Asset ID features of your computer.
Action: You must enter the administrator password to clear this POST
message.
183 Password message received if administrator password is set.
Action: You must enter the administrator password to clear this POST
message. If the message recurs when the cover has not been removed,
have the computer serviced.
184 Asset control antenna not detected.
Action: You must enter the administrator password to clear this POST
message. If the message recurs and the cover has not been removed, have
the computer serviced.
186 Security hardware control logic error. The security data could either not be
read or written and the administrator password and startup sequence are
not reliable.
Action: If your computer is in enhanced security mode, the startup
process will not continue. The system board must be replaced.
187 A problem occurred with the administrator password and startup (boot)
sequence. POST message 167 will normally display, also.
Action: If enhanced security is not enabled, use the Configuration/Setup
Utility program to:
1. Clear the startup sequence (Start Options, Startup sequence).
2. Clear the administrator password. For instructions, see “Deleting an
administrator password” on page 74.
3. Reload the default settings (Load Default Settings).
4. Reset an administrator password. For instructions, see “Setting or
changing an administrator password” on page 72.
For instructions on using the Configuration/Setup Utility program, see
Chapter 5, “Using the Configuration/Setup Utility program” on page 61.
190 The computer chassis-intrusion detector was cleared. This is an
informational message. No action is required.
Chapter 7. Solving problems
111