1. From the list of adapters, select the controller (channel) for the drives that you
want to mirror.
2. Select
RAID Properties
.
3. Select the type of array that you want to create.
4. Use the arrow keys to highlight the first drive in the pair; then, press the Minus
(-) or Plus (+) key to change the mirror value to
Primary
.
5. Continue to select the next drive using the Minus (-) or Plus (+) key until you
have selected all the drives for your array.
6. Press C to create the disk array.
7. Select
Apply changes and exit menu
to create the array.
Setting up a Remote Supervisor Adapter II SlimLine
This section describes how to set up, cable, and configure a Remote Supervisor
Adapter II SlimLine for use on an Advanced System Management (ASM) network
so that you can manage the server remotely.
In addition to the information in this section, see the documentation that comes with
the Remote Supervisor Adapter II SlimLine for information about how to configure
and use an ASM network to manage the server remotely through the Web-based
interface or the text-based interface.
Note:
The Web-based interface and text-based interface do not support
double-byte character set (DBCS) languages.
Requirements
Make sure that you have completed the following procedures before you set up the
Remote Supervisor Adapter II SlimLine:
v
Install the operating system, using the ServerGuide program and the
documentation that comes with the operating system.
v
If you plan to use the remote disk function, install the following software:
– On the server, install Microsoft Windows 2000 with Service Pack 3 or later.
– On the client system, install Microsoft Windows 2000 or later and the Java 1.4
or later Plug-in.
v
Make sure that the server has an Internet connection, so that you can download
software and firmware from the IBM support Web site during the installation
process.
v
If you plan to configure Simple Network Management Protocol (SNMP) trap alerts
on the Remote Supervisor Adapter II SlimLine, install and compile the
management information base (MIB) on the SNMP manager. The Remote
Supervisor Adapter II SlimLine firmware, the integrated service processor
firmware, and the MIB are available on the
ServerGuide Setup and Installation
CD and are fully functional. You can download the latest versions from
http://www.ibm.com/systems/support/.
v
If you plan to use the Web-based interface to access the Remote Supervisor
Adapter II SlimLine remotely, install the Java 1.4 or later Plug-in and one of the
following Web browsers on the client system:
– Microsoft Internet Explorer version 5.5 with the latest Service Pack
– Netscape Navigator version 7.0 or later
– Mozilla version 1.3 or later
The Web browser must be Java-enabled and must support JavaScript
™
.
Chapter 2. Configuration information and instructions
29
Содержание 436854u - System x3200 M2 5U Mini Tower...
