IBM 3455-D3E Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 46

background image

© Copyright IBM Corporation 2019, 2020, 2021 Customer Install Guide, 1U Chassis

33

Electronic Emissions Notices

Class A Notices

The following Class A statements apply to IBM products and their features unless
designated as electromagnetic compatibility (EMC) Class B in the feature information.
When attaching a monitor to the equipment, you must use the designated monitor cable
and any interference suppression devices supplied with the monitor.
United States Federal Communications Commission (FCC) Notice

United States Federal Communications Commission (FCC) Notice

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.

Properly shielded and grounded cables and connectors must be used in order to meet
FCC emission limits. Proper cables and connectors are available from IBM-authorized
dealers. IBM is not responsible for any radio or television interference caused by using
other than recommended cables and connectors or by unauthorized changes or
modifications to this equipment. Unauthorized changes or modifications could void the
user's authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Responsible Party:

International Business Machines Corporation

New Orchard Road

Armonk, NY 10504

Contact for FCC compliance information only:

[email protected]

Der verantwortliche Ansprechpartner des Herstellers in der EU ist:

IBM Deutschland GmbH

Technical Relations Europe, Abteilung M456

IBM-Allee 1, 71139 Ehningen, Germany

Tel: +49 (0) 800 225 5426

email: [email protected]

«
...
31
32
33
34
35
...
»

Содержание 3455-D3E















































Отзывы:

Нет отзывов

Похожие инструкции для 3455-D3E

Бренд: National Instruments Страницы: 34

ValkyrieBay Val-C12-720G

Бренд: Xena Networks Страницы: 15

Бренд: Paradyne Страницы: 11

Hotwire 8820 GranDSLAM Series

Бренд: Paradyne Страницы: 60

Бренд: InWin Страницы: 10

Бренд: Cabletron Systems Страницы: 2

SmartSwitch 9000

Бренд: Cabletron Systems Страницы: 18

Бренд: Supero Страницы: 38

Бренд: Supero Страницы: 42

Бренд: Supero Страницы: 46

Бренд: Supero Страницы: 50

Бренд: Fractal Страницы: 42

Бренд: National Instruments Страницы: 22

VAM (Value Added Modules) System

Бренд: ADC Страницы: 4

Бренд: Orban Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды