IBM 3455-D3E Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 46

IBM 3455-D3E Скачать руководство пользователя страница 10

© Copyright IBM Corporation 2019, 2020, 2021 Customer Install Guide, 1U Chassis

10

Always install stabilizer brackets on the rack cabinet unless the earthquake option is to
be installed.

To avoid hazardous conditions due to uneven mechanical loading, always install the
heaviest devices in the bottom of the rack cabinet. Always install servers and optional
devices starting from the bottom of the rack cabinet.

Rack-mounted devices are not to be used as shelves or work spaces. Do not place
objects on top of rack-mounted devices. In addition, do not lean on rack mounted
devices and do not use them to stabilize your body position (for example, when working
from a ladder).

Each rack cabinet might have more than one power cord.

For AC powered racks, be sure to disconnect all power cords in the rack cabinet when
directed to disconnect power during servicing.

For racks with a DC power distribution panel (PDP), turn off the circuit breaker that
controls the power to the system unit(s), or disconnect the customer’s DC power
source, when directed to disconnect power during servicing.

Connect all devices installed in a rack cabinet to power devices installed in the same
rack cabinet. Do not plug a power cord from a device installed in one rack cabinet into a
power device installed in a different rack cabinet.

An electrical outlet that is not correctly wired could place hazardous voltage on the
metal parts of the system or the devices that attach to the system. It is the responsibility
of the customer to ensure that the outlet is correctly wired and grounded to prevent an
electrical shock. (R001 part 1)

R007

CAUTION: Use safe practices when lifting.

L001

«
...
8
9
10
11
12
...
»

Содержание 3455-D3E















































Отзывы:

Нет отзывов