IBM 3000 6.0.2, Руководство по обслуживанию

Страница: 50 / 88

7. Incorporate new interfaces to the existing single master bond in canister A.
8. Start GPFS in canister A.
9. Remount file systems to canister A.
10. Prepare canister B (top canister slot) for adapter MES.
11. Unmount file systems mounted on canister B.
12. Shut down GPFS only in canister B.
13. Remove canister B from the enclosure.
14. Install the hardware - add one adapter to the available middle slot in canister B.
15. Reinsert canister B into enclosure and do basic checks.
16. Incorporate new interfaces to the existing single master bond in canister B.
17. Start GPFS in canister B.
18. Remount file systems to canister B.
• Steps 1 – 3 are to be customer tasks
• Steps 4 – 6 are SSR tasks
• Steps 7 – 12 are expected to be customer tasks
• Steps 13 – 15 are SSR tasks
• Steps 16 – 18 are expected to be customer tasks
Summary
The goal of this procedure is primarily to add a third high-speed adapter into each ESS 3000 canister.
Customer can add supported InfiniBand or Ethernet adapters into the third PCI slot.
• The PCI address is af:00.1
• The adapter type is ConnectX-5 [ConnectX-5 VPI]
Figure 14. Ethernet ports on canister 1 (upper canister)
Figure 15. Ethernet ports on canister 2 (lower canister)
Note: These images show the PCIe ports for two adapters for each canister. The MES upgrade installs the
third adapter with two more ports in the PCIe slot between the original two adapters.
38 IBM Elastic Storage System 3000: Service Guide