IBM 3000 6.0.2, Руководство по обслуживанию

Страница: 18 / 88

Table 4. Events for the Enclosure component (continued)
Event Event Type Severity Message Description Cause User Action
enclosure_firmware_unknown STATE_CHANGE WARNIN
G
The firmware level
of enclosure {0} is
unknown.
The SAS card is
unable to read
enclosure
firmware.
The SAS card does
not report the
enclosure
firmware.
Check the SAS
connectivity from
node to enclosure.
Use the
mmlsrecoverygrou
p rg_name -L --
pdisk command to
verify if all the paths
to pdisk are
available. Check the
SAS connectivity
using a combination
of the
mmgetpdisktopolo
gy and the
topsummary
command. If there is
an issue with the SAS
HBA or SAS Cable,
reboot the node to
see if this resolves
the issue. If not
contact your IBM
representative.
enclosure_firmware_wrong STATE_CHANGE WARNIN
G
The firmware level
of enclosure {0} is
wrong.
The firmware level
of the enclosure is
wrong.
N/A Check the installed
firmware level using
mmlsfirmware
command.
enclosure_found INFO_ADD_ENTITY INFO Enclosure {0} was
found.
A GNR enclosure
listed in the IBM
Spectrum Scale
configuration was
detected.
N/A N/A
enclosure_needsservice STATE_CHANGE WARNIN
G
Enclosure {0}
needs service.
The enclosure
needs service.
N/A N/A
enclosure_ok STATE_CHANGE INFO Enclosure {0} is ok. The enclosure state
is ok.
N/A N/A
enclosure_unknown STATE_CHANGE WARNIN
G
Enclosure state {0}
is unknown.
The enclosure state
is unknown.
N/A N/A
enclosure_vanished INFO_DELETE_ENTIT
Y
INFO Enclosure {0} has
vanished.
A GNR enclosure
listed in the IBM
Spectrum Scale
configuration was
not detected.
A GNR enclosure,
listed in the IBM
Spectrum Scale
configuration as
mounted before, is
not found. This
could be a valid
situation.
Run the
mmlsenclosure
command to verify
that all expected
enclosures exist.
esm_absent STATE_CHANGE WARNIN
G
ESM {0} is absent. The ESM state is
not installed .
N/A N/A
esm_failed STATE_CHANGE WARNIN
G
ESM {0} is failed. The ESM state is
failed.
N/A N/A
esm_ok STATE_CHANGE INFO ESM {0} is ok. The ESM state is
ok.
N/A N/A
expander_absent STATE_CHANGE WARNIN
G
expander {0} is
absent.
The expander is
absent.
N/A N/A
expander_failed STATE_CHANGE ERROR expander {0} is
failed.
The expander state
is failed.
N/A N/A
expander_ok STATE_CHANGE INFO expander {0} is ok. The expander state
is ok.
N/A N/A
fan_failed STATE_CHANGE WARNIN
G
Fan {0} is failed. The fan state is
failed.
N/A N/A
fan_ok STATE_CHANGE INFO Fan {0} is ok. The fan state is ok. N/A N/A
fan_speed_high STATE_CHANGE WARNIN
G
Fan {0} speed is
too high
The fan speed is
out of the tolerance
range
N/A Check the enclosure
cooling module LEDs
for fan faults.
6 IBM Elastic Storage System 3000: Service Guide