iBell AG10-70, Руководство оператора

Страница: 12 / 20

11

Unpack all parts and lay them on flat, stable surface. Remove all
packing materials. Make sure the delivery contents are complete
and free of any damage. If you find that parts are missing or
show damage, do not use the product but contact your dealer.

Check if the tool is in good conditions by performing a quick
visual inspection. Ensure that you have all the accessories and
tools needed for assembly and operation.
This also includes suitable personal protective equipment.
An angle grinder is a handheld power tool used for grinding,
cutting and polishing.
There are different kinds of discs that are
used for various materials and tasks, such as cut-off discs
(diamond blade), abrasive grinding discs, sanding discs, wire
brush wheels and polishing pads.

The ability to handle different wheels and accessories is what
makes angle grinders so versatile. It includes a spindle washer
(flange) and spindle nut that can install in different
configurations to accommodate thicker or thinner wheels (max
diameter of 100 mm) or remove altogether.

For metal cutting or grinding, the discs are usually made from a
reinforced abrasive material. For stone and masonry cutting, the
discs may be either abrasive cutting discs, or a diamond cutting
disc.
SETUP
UNPACKING AND ENSURING
WARNING!
The product must be fully assembled before
operation! Do not use a product that is only partly assembled or
assembled with damaged parts! Follow the assembly instructions
step-by-step and use the pictures provided as a visual guide to
easily assemble the product!
INTENDED USE
IBL AG10-70|72|92