iBell AG10-70, Руководство оператора

Страница: 14 / 20

13
Wheels or discs like cut-off discs, abrasive grinding discs etc., of
maximum 100 mm diameter is used. Only use sharp and
undamaged wheels. Cracked or distorted wheels must be replaced
immediately.
CENTER WHEEL/ DISC
IBL AG10-70|72|92
WHEEL GUARD
NOTE:
The direction in which the cutting wheel rotates has to be the
same as the direction of the arrow marked on the gear cover.
2
Wheel guard (2) provided with this
product is a locking screw type.
Mount the wheel guard with the
projection on the wheel guard band
aligned with the notch on the bearing box.
Then rotate the wheel guard around
180º
counter clockwise. Be sure to tighten the
screw securely. The guard can be rotated
to such any angle that can protect the
operator according to the work.
To remove wheel guard, follow the
installation procedure in reverse.