iBell AG10-70, Руководство оператора

Страница: 17 / 20

16
Cutting operations should only be attempted with the provided
guard fitted to this grinder. Only use abrasives specifically designed
for this task.

Hold the angle grinder with one hand on the main handle
(housing or body) and the other hand firmly gripping the
auxiliary handle.

Let the wheel reach full speed and carefully enter into the cut
moving the tool forward over the work piece surface.

Always position the guard so that as much of the exposed disc as
possible is pointing away from you.

For best tool control, material removal and minimum overloading,
please keep the disc vertical to the work piece

Never change the cutting angle, this will stall the unit and damage
the cutting disc.

Exert light pressure on abrasive disc for efficient operation.
Pushing too hard will cause a drop in speed and may result in
motor overload and damage.

When cutting is complete, do not touch the hot cutting surface
before the work piece cools down.
*Operations like cleaning, deburring, edge blending, polishing, and
surface finishing can be done by using optional accessories like
Wire cup brush and Wire wheel brush with this product.
These accessories can be screwed directly onto the spindle as
flanges are not necessary.
CUTTING
OPERATIONS USING WIRE CUP/WHEEL BRUSH
NOTE:
Always switch the product off, disconnect the product from the
power supply and let the product cool down before performing
inspection, maintenance and cleaning work! Only perform repairs and
maintenance work according to these instructions! All further works
must be performed by a qualified specialist!
IBL AG10-70|72|92