23
Advanced Chipset Settings
This setting configures the north bridge, south bridge and the ME subsystem. WARNING! Setting the wrong values
may cause the system to malfunction. -
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
Advanced Chipset Settings
Configure North Bridge
features.
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in below sections
may cause system to malfunction.
►
North Bridge Configuration
►
South Bridge Configuration
►
ME Subsystem Configuration
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
North Bridge Chipset Configuration
Disabled
15MB-16MB
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Memory Remap Feature
[Enabled]
PCI MMIO Allocation: 4GB To 3072 MB
DRAM Frequency
[Auto]
Configure DRAM Timing by SPD
[Auto]
Memory Hole
[Disabled]
Initiate Graphic Adapter
[PEG/PCI]
IGD Graphics Mode Select
[Enabled,
32MB]
NB PCIE Configuration
PEG Port
[Auto]
PEG Force GEN1
[Disabled]
►
Video Function Configuration
Memory Remap Feature
This allows remapping of overlapped PCI memory above the total physical memory.
DRAM Frequency
The options are
Auto
,
1067 MHz
and
1333 MHz
.
Configure DRAM Timing by SPD
The options are
Auto
and
Manual
.
Memory Hole
This option is used to reserve memory space between 15MB and 16MB for ISA expansion cards that require a
specified area of memory to work properly.
Initiate Graphic Adapter
This option selects which graphics controller to use as the primary boot device.
IGD Graphics Mode Select
This option selects the amount of system memory used by the internal graphics device.
PEG Port
The options are
Auto
and
Disabled
.
PEG Force GEN1
Some non-graphics PCI-E devices may not follow PCI-E specifications and may incorrectly report their GEN
capability or link width.