22
Boot Settings
This option configures the settings during system boot including boot device priority and HDD/CD/DVD drives.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
Boot Settings
Configure Settings
during System Boot.
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
►
Boot Settings Configuration
►
Boot Device Priority
►
Hard Disk Drives
Boot Settings Configuration
This configuration includes the following items:
Quick Boot
- Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.
Quite Boot
–
Disabled
: Displays normal POST messages.
Enabled
: Displays OEM Logo instead of POST
messages.
Bootup Num-Lock
– Select Power-on state for Numlock.
PS/2 Mouse Support
– Select support for PS/2 Mouse.
Wait for
‘F1’ If Error
– Wait for F1 key to be pressed if error occurs.
Hit
‘DEL’ Message Display
– Displays “Press DEL to run Setup” in POST.
Interrupt 19 Capture
– This allows option ROMS to trap interrupt 19.
Boot Device Priority
This specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in
the corresponding type menu.
Hard Disk Drives
This specifies the Boot Device Priority sequence from available Hard Drives.
Security Settings
This setting comes with two options set the system password. Supervisor Password sets a password that will be
used to protect the system and Setup utility. User Password sets a password that will be used exclusively on the
system. To specify a password, highlight the type you want and press <Enter>. The Enter Password: message
prompts on the screen. Type the password and press <Enter>. The system confirms your password by asking you
to type it again. After setting a password, the screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted to enter the password. A message will
confirm the password to be disabled. Once the password is disabled, the system will boot and you can enter Setup
freely.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
Security Settings
Install or Change the
Password.
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Supervisor Password
: Not Installed
User Password
: Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
[Disabled]