16
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
IDE Configuration
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Mirrored IDER Configuration
[Disabled]
Configure SATA#1 as
[IDE]
SATA#1 IDE Configuration
[Compatible]
SATA#2 IDE Configuration
[Enhanced]
►
Primary IDE Master
: [Hard Disk]
►
Primary Slave Master
: [Not Detected]
►
Secondary IDE Master
: [Not Detected]
►
Secondary IDE Slave
: [Not Detected]
►
Third IDE Master
: [Not Detected]
►
Fourth IDE Master
: [Not Detected]
Hark Disk Write Protect
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection
{Disabled}
[35]
[Host & Device]
The IDE Configuration menu is used to change and/or set the configuration of the IDE devices installed in the
system.
Hard Disk Write Protect
Disable/Enable device write protection. This will be effective only if device is accessed through BIOS.
IDE Detect Time Out (Sec)
Select the time out value for detecting ATA/ATAPI device(s).
ATA(PI) 80pin Cable Detection
Select the mechanism for detecting 80pin ATA(PI) cable.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
Configure Win627UHG Super IO Chipset
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Serial Port1 Address
[3F8]
Serial Port2 Address
[2F8]
Restore on AC Power Loss
[Power Off]
Power On Function
[None]
Onboard Serial Port/Parallel Port
These fields allow you to select the onboard serial ports and their addresses. The default values for these ports are:
Serial Port 1
3F8
Serial Port 2
2F8/
Restore on AC Power Loss
This field sets the system power status whether
on or off
when power returns to the system from a power failure
situation.