IAI RCM-TD, Руководство по эксплуатации

Страница: 57 / 106

49
Operation Screen Reference
3. Press the Return key again.
Edit/Teach Axis 1
Clr/All: No -- > Return
Teach/Play: (Ten key Match)
Position -- > Return
[Srv ON Pos 0.00]
The numeric value will input the
Return key only.
4. Use key to move the cursor,
and then select * Jog and press
the Return key.
Edit/Teach Axis 1
* Direct Teach (Servo OFF)
* Jog * Increment * Home
* Move * Continuous
[Srv ON
Pos 0.00]
Use the key to move the
cursor inside the sub display
area.
5. Select speed with the key.
Move the slider with the key
and match it to the desired
position.
: Plus direction of display
coordinates
: Minus direction of display
coordinates
Press the Return key.
Edit/Teach Axis 1
Jog (<- · -> key)
Speed 1 2 3 4 5 -> Fast
Return --> Acquire
[Srv ON
Pos 500.00]
: Speed select
Using the
key, move the
main screen cursor to change the
inputting position number.
Vel 1: 1 mm/sec
Vel 2: 10 mm/sec
Vel 3: 30 mm/sec
Vel 4: 50 mm/sec
Vel 5: 100 mm/sec
However, only the maximum
speed will be gained if the
maximum speed is slower than
the specified speed.
Position Vel
Position Vel
Position Vel