78
About the removal process and the link process of hard disk
drives
When replacing the HDD, you need to remove the HDD before replacing it.
When the status of the replaced HDD is "Playback-only", in addition to the formatting of the HDD, it can be
made into a recordable HDD by embedded processing.
Be sure to consult the dealer for the removal, installation, and the related process of hard disk drives.
Remove the HDD [Remove HDD]
Step 1
Click [Execute >] on the [Remove HDD].
→
→
The HDD removing screen will be displayed.
Step 2
Check the HDD to be removed in the Remove column
and click the [Start] button.
The HDDs can be removed when "OK" is displayed in
the "Results" field. Click the [Back] button.
Add the HDD [Add HDD]
Step 1
Click [Execute >] on the [Add HDD].
→
→
The HDD adding screen will be displayed.
Step 2
Check the HDDs to add, and click the [Start] button.
The process is completed when "OK" is displayed in
the "Results" field and the HDDs are ready for
recording. Click the [Back] button.
Important:
• When the link process is performed, the data will be erased.
[Setup via recorder's main monitor]
