Hyundai Seasall S220P, Руководство по ремонту

Страница: 65 / 150

Engine Mechanical System
64
Intake and Exhaust System
4. Tighten the common rail (A) slightly for the
installation of the high pressure pipes.
5. Install the injectors with inserting the packing.
(Refer to Injector in FL Group).
6. Check if the packing are seated well.
7. Install the high pressure fuel pipe (rail to injector).
8. Tighten the common rail with the specific torque.
9. Install the high pressure fuel pipe (rail to pump).
Tightening Torque:
7.8 ~ 11.8Nm (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
10. Install the engine hanger.
Tightening Torque:
19.6 ~ 26.5Nm (2.0 ~ 2.7kgf.m, 14.5 ~ 19.5lb-ft)
11. Install the high pressure fuel pipe(rail to rail).
12. Install the fuel feed and return hose or pipe
Tightening Torque:
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
13. Install the CMP sensor.
Tightening Torque:
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
14. Install the glow control unit(A).
Tightening Torque:
6.9 ~ 10.8Nm (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0lb-ft)
15. After seating the inlet manifold gasket, install the
inlet upper manifold assembly.
Tightening Torque:
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)