Hyundai Seasall S220P, Руководство по ремонту, Страница: 16 / 150

Engine Mechanical System
15
Cooling System
4. Installation is in the reverse order of removal.
Thermostat
✍
NOTICE
Disassembly of the thermostat would have an adverse
effect, causing a lowering of cooling efficiency.
1. Drain the engine coolant so its level is below
thermostat.
2. Remove the thermostat with its gasket after taking off
the water inlet fitting (A) from the engine coolant control
assembly.
Tightening torque:
7.8 ~ 9.8Nm (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
3. Installation is in the reverse order of removal. Water
Outlet Duct and Fitting
Water outlet and fitting
1. Remove the intake and the exhaust manifold system.
2. Remove the water outlet duct(A).
Tightening torque:
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
3. Loosen the oil cooler mounting bolts for space of the
outlet fitting's removal.
4. Remove the water outlet fitting(A).
Tightening torque:
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Engine Coolant Control Assembly
1. Drain engine coolant.
☢
WARNING
The system is under high pressure when the engine is
hot. To avoid danger of releasing scalding engine
coolant, remove the cap only when the engine is cool.
2. Remove the drive belt.
3. Remove the alternator (A).