HydroQuip BES6000-HC Series, Руководство по эксплуатации и установке

Страница: 20 / 22

Limited Warranty
Hydroquip, Inc. warrants these products to be free from defects in material and
workmanship for a period of 1 year from the date of purchase (DOP), under the following
provisions:
From DOP to date of installation (Not to exceed 10 working days after DOP),
products suspected of failure at time of installation may receive a replacement of
component or like product if evaluated by Hydroquip Technical Support with an
authorized service professional at the job site. Hydroquip, Inc. will not cover failure
due to improper installation, unauthorized modification, negligence, abuse, misuse, or
misapplication.
Product failure after installation and up to 30 days from DOP may receive a
component replacement if evaluated by Hydroquip Technical Support and an
authorized service professional at the job site. Hydroquip, Inc. will not warrant heater
elements, heater assemblies with short to ground, fuses, optional controls, or
damaged related to freezing, water chemistry, unauthorized modification, negligence,
abuse, misuse, or misapplication.
Product failure after 30 days and up to 1 year from DOP will be repaired or replaced
at our option. Hydroquip, Inc. will not warrant heater elements, heater assemblies
with short to ground, fuses, or damaged related to normal wear and tear, freezing,
water chemistry, unauthorized modification, negligence, abuse, misuse, or
misapplication.
This warranty extends only to the normal, personal use by the original retail purchaser.
The warranty does not cover any commercial use of this product in any way.
Pump seals, O-Rings, gaskets, are not covered by the Hydroquip, Inc. warranty during
the first 12 months of the warranty period. Some items furnished by Hydroquip, Inc., such
as spa-side controls, may be made by other manufacturers who might have longer
warranty periods.
Hydroquip, Inc. will not be responsible for labor incurred in removing, inspecting,
repairing, or reinstalling this product. Hydroquip, Inc. will not be responsible for labor
incurred for routine maintenance, adjustments, or alterations to the calibration of
electrical components.
Resellers of Hydroquip, Inc. equipment may request pre-authorization to return a product
that is claimed to be defective by calling 951-273-7575 or faxing 800-332-7190. The
authorized service agent must ship the product freight prepaid to Hydroquip, 510A N.
Sheridan St. Corona, CA 92880. Upon repair or replacement the product will be returned
to the sender freight collect. When sent to Hydro-Quip, the product must be
accompanied by the sales receipt or other proof of the purchase date as well as the
sender’s name, mailing address, daytime phone number, and any other information
relating to the claim.
Unless state law expressly provides otherwise, Hydroquip, Inc. will only be responsible
for repair or replacement of its products that are found to be defective as provided above,
and will not bear the cost of any incidental or consequential damages. This warranty
gives you specific legal rights and you may also have other rights that vary from state to
state.
85-0130 REV.10 5/11
19