HydraMaster CDS 4.6 Скачать руководство пользователя страница 39

Страница: 39 / 126

Water Pump Maintenance: 6-2

PERIODIC MAINTENANCE

Change the oil after the first 50 hours of operation, with the pump stopped and the oil still

warm, and after every 300 operating hours or 3 months of operation. When changing the

oil, remove the drain plug on the oil drain hose so all oil and accumulated sediment will

drain out.

The initial oil change is recommended for no other reason than to eliminate impurities that

may be in the oil during the running-in phase. If these impurities are not removed, but are

allowed to remain in the oil, they may cause premature wear to the moving parts and the

oil seals.

If the pump works in conditions with high humidity and with sharp temperature changes,

condensation may appear inside the crankcase. Condensation mixing with the oil can

change the oil’s properties, which is easy to detect because the oil changes to a white,

milky color.

If the pump does not have excessive water leaking from the packings, and the oil becomes

milky, the oil has to be changed more frequently.

Содержание CDS 4.6































































































































Результаты поиска

Содержание CDS 4.6

Отзывы:

HydraMaster CDS 4.6, Руководство пользователя, Страница: 39 / 126

Результаты поиска

Содержание CDS 4.6

Отзывы: