HydraMaster CDS 4.6 Скачать руководство пользователя страница 108

Страница: 108 / 126

Vacuum Blower System: 8-4

4.0. Noisy Vacuum Blower

4.1.Vacuum blower is low on

oil.

Inspect oil level and replenish as necessary

Running the blower when it is low on oil will cause severe internal damage to the

blower. If this situation occurs, the blower should be inspected by a qualified service

technician.
4.2. There is internal damage

to blower.

Refer to qualified service technician.

5.0. Vacuum Blower is locked and will not turn

5.1.The machine has been

unused for a period of time

and the blower was not

properly lubricated when

it was shut down, causing

rust to build up on internal

surfaces.

Spray penetrating oil into blower and let sit for at least

1 hour. Then very carefully use pipe wrench on outer

diameter of pulley on blower shaft and attempt to free

up blower. Do not use wrench directly on blower shaft.

If unable to free up blower in this manner refer to a

qualified service technician.

5.2. There is internal

damage to blower.

Refer to qualified service technician.

Содержание CDS 4.6































































































































Результаты поиска

Содержание CDS 4.6

Отзывы:

HydraMaster CDS 4.6, Руководство пользователя, Страница: 108 / 126

Результаты поиска

Содержание CDS 4.6

Отзывы: