manualshive.com logo in svg

HydraMaster CDS 4.6, Руководство пользователя, Страница: 38 / 126

Поделиться
Скачать
HydraMaster CDS 4.6 Скачать руководство пользователя страница 38

6-1:   Water Pump Maintenance

6 - Water Pump Maintenance

The  CDS’  water  pump  features  a  dynamic  low-pressure  seal  retainer,  an  innovative 

intermediate ring, and superior low-pressure and high-pressure seals. With its ceramic 

plungers and nickel-plated forged brass manifold, this high-temperature pump is ideal for 

use in carpet cleaning.

you must perform daily and periodic maintenance 

on the pump to maintain maximum performance 

of seals and valves.

This section of the manual explains:

Daily Maintenance

 

„

Periodic Maintenance

 

„

Water Pump Troubleshooting

 

„

DAILY MAINTENANCE

Check the oil level and the condition of the 

1. 

oil. The oil level should be up to the center 

of the sight glass on the back of the pump.

use a SAe15W40 oil.

2. 

If the oil becomes discolored and contaminated, one of the oil seals may be damaged.  

Refer to the Pump owner’s Manual, included with the CDS 4.8 / 4.6 owner’s Manual, for 

more information.

Do not operate the pump if the crankcase has been contaminated with water.

Do not leave contaminated oil in the pump housing or leave the housing empty. Remove 

contaminated oil as soon as it is discovered and replace it with clean oil.

 

Do not turn the drive shaft while the oil reservoir is empty.

Protect the pump from freezing.

Содержание CDS 4.6































































































































Отзывы:

Нет отзывов