manualshive.com logo in svg

HydraMaster CDS 4.6, Руководство пользователя, Страница: 115 / 126

Поделиться
Скачать
HydraMaster CDS 4.6 Скачать руководство пользователя страница 115

   Machine Maintenance:   10-2

Daily 

Check engine oil level. 

• 

Inspect fresh water (garden) hose screen. Clean as needed. 

• 

Empty waste tank inlet filter. 

• 

Visually inspect machine for loose wires, oil leaks, water leaks, etc. 

• 

Inspect  vacuum  tank  stainless  steel  filter  for  clogging  or  damage.  Clean,  repair  or 

• 

replace as needed. 

Inspect and clean the vacuum slot on the cleaning wand. Watch for sharp edges that 

• 

may tear the carpet, remove any sharp edges as required. 

lubricate blower with an oil-based lubricant through blower inlet. 

• 

Perform freeze guard procedure as weather dictates

• 

Weekly

Check around vehicle and CDS unit for any evidence of oil/fluid leaks.

• 

Grease, oil, antifreeze, and debris build-up near hot equipment, such as the vehicle engine 

exhaust system or the CDS blower exhaust system, can present a fire hazard.

Check high pressure pump oil. Add as necessary. 

• 

Check pump drive belts for wear. 

• 

Check pump pulleys for wear. 

• 

Check internal machine high pressure water lines for wear or chafing. 

• 

Remove the stainless steel blower inlet filter inside the recovery tank and thoroughly 

• 

clean, removing all lint build-up. Inspect for damage and re-install. 

Remove the filter screen from the fresh water (garden hose inlet fitting. Thoroughly 

• 

clean and reinstall. 

empty  chemical  from  the  chemical  container.  Wash  out  thoroughly  to  remove  any 

• 

chemical build-up. 

Inspect vacuum relief valve. Clean and lubricate as necessary. 

• 

Inspect all external solution hoses, vacuum hoses, and quick connects  for wear or 

• 

damage that may cause premature failure, replace as needed. 

Clean vacuum tank thoroughly with high pressure washer. 

• 

flush water and chemical system with 50/50 white vinegar solution. 

• 

Check vehicle engine rpm on CDS tachometer: 

• 

 

 

Speed 1  =  1500

 

 

Speed 2  =  1400

 

 

Speed 3  =  1300

Monthly

Change engine oil. 

• 

Check engine air cleaner filter. Clean as necessary. 

• 

Clean battery connections as needed. 

• 

Grease drive shaft u-joints. Inspect for wear. (See Drive Shaft Maintenance at the end 

• 

of this section.)

Содержание CDS 4.6































































































































Отзывы:

Нет отзывов