HYBREX G1 8-24, Руководство пользователя

Страница: 150 / 200

150
programmed on Mode 05-02-06 will be ignored. A hook switch flash that is equal to or greater than the
setting, but less than the SLT Release time listed above will be considered by the G1-824i digital
Telephone System as a hook switch flash. The valid timing parameters are:
SLT Hold Signal, (05-02-06) 0=64 milliseconds 1=80 milliseconds
2=104 milliseconds 3=200 milliseconds 4=4\304 milliseconds 5=400 milliseconds
6=512 milliseconds 7=600 milliseconds 8=704 milliseconds 9=900 milliseconds
Single Line Hold Function, Mode 05-06-07, determines the action required in order to place a call on hold
by a single line telephone set. The valid options are as follows:
Setting Action Required
0 Press Hook switch (Flash)
1 Press Hook switch (Flash), Dial [7]
3 Press Hook switch (Flash), Confirmation Tone, Dial [7]
Single Line Telephone Busy Remind Tone or (Camp on Tone) , (Mode 05-08-03), determines whether
single line telephones in the system will receive Camp-On tone for calls camped-on to a busy station and
if hold recalls will cause a camp-on tone to be heard. This option does not affect the function of camp-on
or hold recall. It only determines whether audible tones will be used to remind single line users that the
call is waiting. Valid settings are:
SLT Busy Remind Tone, (Mode 05-08-03)
0=Enable 1=Disable
Single Line Telephone Programming Digit, Mode 05-08-05 sets the first number used in the programming
of features on single line telephones. The list of valid entries is below:
SLT Programming Digit Mode, (05-08-05) 0=Disabled 1=x
2=2xx 3=3xx 4=4xx 5=5xx
6=6xx 7=7xx 8=7xx 9=7xx
Note:
If Mode 01-08-05 is set to 0 (Disabled), single line telephones will not have the ability to utilize
any programmable features.
Mode 43-port-02 provides for marking a single line port as a Voice Mail port by placing ‘8’ in this position.
Mode 43-port-02 also provides for marking a single line port as the companion of a Key set by placing ‘3’
for the port of the Key set.
The default value for a single line port is ‘4’.
Operation
Operation of Single Line Telephones is detailed in the Single Line Telephone User's Guide.