HW Group IP Relay HWg-ER02b, Руководство пользователя

Страница: 5 / 40

IP Relay HWg-ER02b - Manual HW group
www.HW-group.com 5/ 42
NO
+
-
COM
POWER OUT
12V
Relay outputs

NO and NC labels apply to Off (0) state, or device turned off

When the output is On (1), a “
Normally Open
” (
NO ) relay contact is closed

LEDs: Closed contact is indicated by a LED

Isolation : The double-throw contact is electrically isolated from the rest of the device

ID range: Outputs use ID addresses from 1 to 2
Digital (dry contact) inputs
Digital input terminals may be connected to voltage-free contacts or the GND pin. The inputs are
electrically connected to the 12V power supply. Never connect the inputs to 48V!

Unconnected inputs read as “
0 (Off)
”.

Active inputs read as “
1 (On)
”.

Supported sensors: Any contact without external voltage (dry contact)

Polling period: 200 ms

Range of sensor IDs: Inputs use ID addresses from 1 to 2
NO NC