HW Group IP Relay HWg-ER02b, Руководство пользователя

Страница: 13 / 40

IP Relay HWg-ER02b - Manual HW group
www.HW-group.com 13/ 42
Setting up without WWW (TCP Setup)
Use the Hercules utility:

Change to the “
TCP Client
” tab and enter the configured IP address. Set the
TCP port to 99 .

Click “Connect”. The listing on the left displays the “
WEB51>
” prompt. Click inside this pane
and press ENTER. The window displays the current configuration.

To set a parameter, enter the
corresponding letter and the desired
value (for example “
I192.168.6.8
” to
set the device IP address). To
show the help for a command, enter
the command and a question mark,
and press ENTER
– for example,
“
I? <Enter>
“. All the settings are
described in detail later in this
manual.

After setting the parameters, use R
for
Reboot
and press “Disconnect”
to disconnect from the device. The
device restarts.

Note: TCP Setup can be disabled
with the “Enable TCP setup” option.
When unchecked, the device
refuses connections to port 99.
Setting up the device using a RS-232 terminal
If you do not have Windows or our Hercules utility available, you can set up the device over RS-232
using any terminal.

Set DIP1 = ON , DIP2 = OFF.

Connect RS-232 (port 1) to a PC using the
supplied
LapLink cable.

Open your favorite terminal program (e.g.
Hyperterminal), choose the correct serial
port and configure it to
9600 8N1 .

Connect the power adapter to the
electrical outlet and to the device.

If the power is OK, the green Power LED
should light up.

If the serial cable and terminal program
are working, the text menu for configuring
the device appears.
Continue by following the steps as in the previous
case.