IP Relay HWg-ER02b - Manual
HW group
www.HW-group.com
37/ 42
Parameters unavailable in the WWW interface
Security
===== Security Setup ======
%A: TCP autorisation
Off
Activates TEA authentication (one-time exchange and
password verification to allow the TCP connection to be established)
– requested from the remote
side after the connection is established.
%K: TEA key 0:01:02:03:04 1:05:06:07:08 2:09:0A:0B:0C 3:0D:0E:0F:10
Use “%
K
” to set the TEA key. Set 16 bytes as four quadruples of colon-separated hex values. The
first character identifies the quadruple (0th to 3rd). So, to set the last 4 bytes to the displayed value,
use “%K3:0D:0E:0F:10”. The key is used to verify one-time passwords (OTP) when authenticating
the remote side.
Other device parameters
Q: Quiet (Batch) mode
Quiet mode is useful when the configuration parameters need to be handled automatically, with a
script. Quiet mode is enabled with “
Q1
”. After pressing Enter, the device responds with a list of
parameters in the following format:
WEB51=2.L=00:0A:59:00:A6:08;I192.168.1.24;J23;M255.255.255.0;G192.168.1.1;W0.0.0.0;N0.0
.0.0;X0.0;Y0.0;S192.168.6.51;U4023;T0;V0;K1;A250;&B9600;&D8;&P1;&S1;&C1;&R0;&T0;&G0;&H0
;%A0;%K01:02:03:04:05:06:07:08:09:0A:0B:0C:0D:0E:0F:10;%S1;#T3;#A3;#B192;#C3;#D0;#X0;#Y
0;#Z3;#W0;*L1;*P0;*S58.0.0.0;*M255.0.0.0;*X10.0.0.0;*Y255.0.0.0;*E999
0: TEA
authentication
Off
1: TEA
authentication
On
