IP Relay HWg-ER02b - Manual
HW group
www.HW-group.com
17/ 42
Detailed VSP Settings
Log enabled
The VSP driver logs the virtual serial port activity to “
C:\serialport.log
”.
Create port on start VSP
Automatically creates virtual ports when the driver is started. To create virtual ports at
Windows startup, the “Start VSP on boot” box must be checked, too.
TCP Server Mode
Activates VSP as a TCP/IP server. The driver then behaves as a TCP Client/Server device
–
the first side to receive any data switches to Client mode and establishes the connection.
The incoming TCP server port is configured at the main “
Virtual SP
” tab. We recommend
using port numbers higher than 1025.
Hide on startup
Hides VSP to to the system tray. The VSP icon is accessible near the clock.
Don't create port if ping fail
Before creating the virtual serial port, tests if the device IP address responds.
Connect to Device even if VirtualCOM is closed
If the virtual serial port is not in use by any application, checking this box can lead to losing
some received data from the remote device.
Strict Baudrate Emulation
Limits the application-to-VSP and TCP-to-VSP transfer rate according to the baudrate of the
open serial port.
1
2
