background image

Damocles2

66

http://hw-group.us/product-version/damocles2-data-formats 

XML interface description

The XML format is identical for both Poseidon2 and Damocles2 devices.

http://hw-group.us/product-version/poseidon2-xml-format 

Modbus over TCP – Interface description

Note: 

For details about Modbus/TCP, see our website – 

AN28: Damocles family & Modbus/TCP

.

HWg-netGSM – remote SMS gateway protocol for HW group products

For a current protocol description, see: 

http://hw-group.us/cs/node/4648

.

SNMP – Interface description

http://hw-group.us/support/kba001-snmp-popis-rozhrani 

SNMPv3

http://hw-group.us/support/kba002-snmp-v3-jeho-vyhody-a-nasazeni-v-jednotkach-poseidon2-a-damocles2

 

HTTPS in Damocles2 and Poseidon2

http://hw-group.us/cs/podpora/kba003-https-v-jednotkach-poseidon2-a-damocles2

Formats and interfaces

Formats and interfaces

Poseidon2 

4002

Unit designed for demanding monitoring 
applications, e.g. in data centers and industry.

Poseidon2 

3468

Remote monitoring of temperature, humi-
dity and other enviromental conditions in 
industrial design.

Ares 

10/12

Remote surveillance of environment wherever 
there is GSM coverage.

HWg-PWR 

3/12/25

Measures power consumption using external 
M-Bus meters.

Poseidon2 

3266/3268

The basic unit for monitoring temperature, 
humidity and other enviromental conditions 
across LAN.

HWg-WLD

Unit for detecting fl ooding with detection over 
the entire length of the sensing cable.

Other HW group devices from Monitoring category

Содержание Damocles2 1208




































Отзывы: