HW Group Damocles2 1208, Руководство пользователя

Страница: 32 / 35

Damocles2
Damocles2 Damocles2 62 63
Damocles2 1208 dimensions Damocles2 1208 specifications
Specifications Specifications
Ethernet
Interface RJ45 (100BASE-Tx) – 10/100 Mbit
Supported protocols
ARP, ICMP, UDP / IP: SNMP,
TCP / IP: HTTP, Modbus / TCP, SMTP, netGSM, HWg-PUSH, XML, IPv6, HTTPs, MQTT
SNMP compatibility SNMPv3 compatible, partial support for v2.0
DO – Outputs
Type 8× Open collector
Max. load 50 V max. 500 mA / 1 output, max. 1500 mA / all 8 outputs
DI – Inputs (Dry contact inputs)
Ports I1 – l12
Type
12× Digital Input (for a voltage-free contact, such as a NO/NC relay contact, Dry Contact)
Sensitivity 1 (On) = 0-500
Ω
(Up to 12 V can appear at the socket against GND)
Pulse counter 12× 32-bit, min. pulse width 20 ms. Counter value is retained even after power disconnection.
Max. distance Up to 50 m
LED
Power (RJ45) Green – power OK
Link & Activity (RJ45) Green – physical connection established, Yellow – flashes, communication taking place
Input / Output Status Green – input, Yellow – output
Alarm On
Setup Flashing
Parameters
Power 9–30 V / 1.7 W DC
Power connectors
1× barrel jack (2.5 mm, outer diameter 6.3 mm)
1× terminal block
Temperature ranges
Operation: -30 to +65 °C (+14 to +150 °F)
Storage: -30 to +65 °C (-22 to +150 °F)
Dimensions / mass 145 × 40 × 90 mm / 222 g
DIP Switch
DIP1: Setup
OFF – Normal function mode
Restoring factory defaults: Toggle the switch 3× during the first 5 seconds after powering up
DIP2: Security
ON = Security mode – configuration cannot be changed remotely
OFF = Non-secure mode – configuration can be changed remotely
IN1 GND IN2 IN3 GND IN4 IN5 GND IN6 IN7 GND IN8 IN11 GND IN12
10 mm
70 mm
125 mm
135 mm
145 mm
90 mm
40 mm
SE
TUP
SAFE
GND +U
Pow er
Activity Link
ETHERNE T
9-30V
GND OC1 GND OC2 GND OC3 GND OC4 GND OC5 GND OC6 GND OC7 GND OC8
IN9 GND IN10
PO
WER
IN1 IN5 IN9 IN3 IN7 IN
11
IN2 IN6 IN
10
IN4 IN8 IN
12
ALARM
OUT
8
OUT
7
OUT
6
OUT
5
OUT
4
OUT
3
OUT
2
OUT
1
4×ø5,3 mm
ON
1 2