P/N 3143042_B 1-9
EGPF Merchandisers
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
INSTALLING PUMP & COLLECTION PAN KIT
4. Attach hose to tee. Insert opposite end
of drain hose at least 1 inch onto slot on
pump, located on top of the pump.
Insert Drain Tubing
at least 1” onto slot
on pump.
5. Place pan underneath interior back panel.
4
INSTALL INTERIOR BACK PANEL
The interior back panel is packed separately
with the case. The cutouts in the panel
provide access to the valves, the pump and
reservoir.
TOP VIEW
147.70
3751.7mm
36.75
933.4mm
47.47
1205.7mm
4.75
120.6mm
10.75
273mm
3 IN (77 MM) REQUIRED AIR GAP
TOP ELECTRICAL BOX
20.25
514.3mm
POWER IN
(FIELD SUPPLY)
EVAP PAN HEATER
4.00
101.5mm
15.75
400mm
FRONT SIDE
1.68
42.7mm
BOTTOM VIEW
FRONT SIDE
REAR SIDE
43.60
1107.3mm
7.25
184.1mm
RESERVOIR
PUMP ENCLOSURE ASSEMBLY
5.91
150.142mm
GAP BETWEEN
FOAM PNL AND INTR PNL
7.41
188.242mm
HONEYCOMB
39.95
1014.73mm
PUMP COVER
36.88
936.841mm
PUMP
Secure Pan Tubing
Condensate Pan
Tubing to Pump
Condensate Pan
(Installed on top of case)
6
6. Connect tubing to condensate pan, which is
to be located on top of the case. See Page 2-2
of this manual for location of top-mounted
condensate pan.
