1-6
I
nstallatIon
P/N 3143042_B
U.S. & Canada 1-800-922-1919 • Mexico 800-890-2900 • WWW.HUSSMANN.COM
SECURING CASE TO FLOOR
The case must be secured to the floor using anchors that are fastened to the two end base
uprights.
1. Use a square. It is important to make sure the end base uprights are 90° from the back-
foam assemblies before installing the 6 anchor bolts in the concrete.
2. Use a hammer drill to drill ½" diameter holes 2¾" inches deep in the concrete. (3 on
each end of the case.) Clean out concrete dust from holes.
3. Install the ½" diameter anchor bolts. Tighten nuts to secure case to the floor.
Anchor Locations
Insulation
Cover
Upper Cover
Base Cover
BASE UPRIGHT INSULATION &
COVER INSTALLATION
1. Install the lefthand insulation.
2. Install the lefthand lower cover using
supplied painted screws.
3. Install the lefthand upper cover. Repeat
for righthand side of case base upright.
4. Apply silicone sealant to gap.
Gap
