EGPF Merchandisers
P/N 3143042_B
1-5
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
ALIGN END FRAMES AND JOIN CASE ENDS TOGETHER
Cases are joined from left to right. Move the second case (case on right side facing the
front) as close to the first as possible by using a j-bar or pallet jack.
Case joining covers must be removed. Use the joining locations as shown in the illustration
below. Loosely fasten cap screws, washer and nut retainers at all locations. Tighten the
rear and bottom locations first. Note there is a joining bracket on top of the case canopy as
shown in the detail below. Tighten that locations last.
ALL JOINTS MUST BE AIR-TIGHT TO PREVENT
FORMATION OF ICE OR CONDENSATION.
SIDE VIEW
JOINING LOCATIONS =
3136323 B
3
2
FASCIA-CANOPY CTR DD5X5FRW
SCREW-SM 8-18X1/2 HX HD TEK2
4
4
2
1
1
1
CASE CANOPY FRONT
Joining
Bracket
