IGSV-ASCS-0303
18
Maintenance (continued)
1. Remove
2. Lift open
3. Loosen hex screw
4. Add or remove
5. Close glass panel(s)
top glass
glass panel(s)
(1/4" allen).
shims as needed.
and check alignment
and panel
and relieve
Remove chrome
(see note on shims Retighten hex screw
enclosing
tension on
access cap in order
below)
and reinstall removed
mini-top
hinge.
to hold nut plate.
components.
hardware.
1. Remove
2. Lift open
3. Loosen (4mm)
4. Move panel
top glass
glass panel(s)
screw slightly. as required
enclosing
and relieve
one at each hinge
Retighten components
mini-top
tension on
hardware.
hinge.
Back
of Case
Inside
of Case
Chrome cap
for access to
nut plate
nut
plate
CUT VIEW:
Mini Top
Hardware
Adjust glass Up and Down
(vertically)
Adjust glass Side to Side
(horizontally)
Adjust glass Front to Back
NOTE: Before making any of the recommended adjustments,
Verify that the case(s) have been leveled properly.
1. Remove
2. Estimate
3. Lift open
4. Loosen hex screw
5. Slide the mini-top
top glass
amount of
glass panel(s)
(1/4" allen) slightly. forward or backward
and panel
adjustment
and relieve
Remove chrome
to the mark in step 2.
enclosing
and make
tension on
access plate in order
Check alignment of
mini-top
pencil mark
hinge.
to hold nut plate.
glass.
hardware.
on the mini-cam.
Retighten components.
NOTE: Standard shim thickness is 1/16"
RGSDS hardware shown
Tech/glassadj/970602 tn
A
B
C
Содержание ASCS
Страница 38: ...IGSV ASCS 0303 38...